Electromagnetic Flow meter made in China manufacturer

Diameter: 10-2200mm

Combination: S. Integrated type

                      L. Remote type

Electrode Material: M. Stainless steel316 

                 T.Ti

                 D.Ta

                 H. Hastelloy alloy 

               P.Pt

                N.Ni

Electrode Materials:

Standard: 316 Stainless Steel

Optional: Conduct Factory

Liner Material: PTFE, FEP (Rubber)

Fluid Temperature: PTFE: 100°C Standard(Customized: 180°C)

FEP: 60°C

Pressure Limits:

1.0 Mpa; Optional 1.6; 2.5; 4.0 Mpa

Coil Power: Pulsed DC

Pipe Spool Material: 316 Stainless Steel

Meter Housing Material:

Carbon Steel welded

Flanges:

Carbon Steel - Standard (ISO 7005-1)

316 Stainless Steel - Optional

Optional Stainless Steel Grounding Ring

Features and benefits

   No moving parts;Virtually no pressure drop;Minimal maintenance

   Wide range of nominaldiameters;

   Broad selection of lining andelectrode materials

Applications for magnetic flowmeters are:

Monitoring and control of a variety of industrialeffluents
Paper pulp waste
Mining slurries
Brine
Liquid food products
Detergents
Waste sludge in sewage treatment plants and water and wasteindustries.
Corrosive acids
Solid bearing fluids
Electrolytes
Process chemical

Advantages for magnetic flow meters

Non obtrusive flow in full-bore models
No moving parts
Virtually no pressure drop
Insensitivity to viscosity, specific gravity, temperature andpressure (within certain limitations)
Will work with laminar, turbulent, and transitional flows
Can respond well to fast changing flows (for high-frequency DCpulse and AC excitation designs only)
Good accuracy (0.5 to 1%)Can handle slurries and heavyparticulates
Lining protectors available for harsh, chemically corrosive, andabrasive fluids  

• General Specification:

Power Supply: 85-265Vac (Optional: 18-36 Vdc)

Power Consumption: 10W

Accuracy:

± 0.5% accuracy of rate from 0.5-10 m/s

± 1.0% accuracy of rate from 0.1-0.5 m/s

Repeatability: 0.2%

Minimum Fluid Conductivity:

5.0 micromhos/cm

Flow Direction: Unidirectional orbidirectional, 2 separate totalizers (programmable)

Analog Outputs: 4-20mA, 500ohms Max Load

Output Frequency: Scaled Pulse output, (opencollector) Max 5Khz

Noise Damping: Programmable

Pulse Width: Programmable up to 500ms

Zero-point Stability: Automatic correction

Ambient Temperature: -4 to 140° F (-20 to 60°C)

Electromagnetic Flow meter madein China manufacturer